Setting wifi printer epson l355 mac

Epson Product Setup contains everything you need to use your Epson product.

How to set-up Epson printers to use Wi-Fi 2013 (Mac EN)

The installer downloads and installs the latest driver software for your Epson product which may include where applicable printer drivers, network Wi-Fi drivers, scanner drivers and software. If the Epson Product Setup tool is not available for your product continue to the section below. If the Epson Product Setup tool is not available for your product, we recommend that you download and install everything under this heading, but the following are required as a minimum to use your product with a computer: Printers : you will need to download and install the Driver.

Scanners : you will need to download and install Epson Scan.

It is important to ensure that you install Epson Scan first. This above screens apply to Internet Explorer 11 only.

Page Not Found.

If you are using and older version of Internet Explorer or another browser, select the option to run or save the file to the desktop, if available. In some browsers, your download may automatically be directed to a pre-selected folder. All Epson software is checked for viruses and potential errors. As such any files downloaded from the Epson site should be regarded as coming from a trusted source. If you receive a warning advising that the publisher could not be verified, confirm that the name of the file in the warning is the Epson file you downloaded, then continue with the installation.

Find a repair centre

Not signed in yet? New registration. We respect your privacy. Your email address or other details will never be shared with any 3rd parties and you will receive only the type of content for which you signed up. You can unsubscribe at any time with a click on the link provided in every Epson newsletter.

If you would like to register as an Epson partner, please click here. Not yet an Epson partner? For more information and for registration, please click here. We use cookies on our website.

Check that the PC you want to connect to is turned on. If it is turned off, turn it on and perform network setup for your printer again. Place your printer close to the PC you want to connect to. Check that the Wi-Fi communication mode set for your access point matches the one supported by your printer. Security mode e. Confirm security mode. Confirm that the access point is using one of the following security modes.

Important Information

If it is not, perform network setup again and change it to a supported security mode. MAC address of your printer may be filtered. See the instruction manual that came with your access point for more information on the MAC address filtering function. If the filtering function is enabled, register your printer's MAC address to prevent your printer from being filtered. If you have used the WEP security mode for your access point to enable Shared authentication, confirm that both authentication key and index are correct. The security key set for the access point and the entered security key do not match.

Set up your network again using the correct security key. Incorrect IP address is assigned to the printer. Confirm IP address setup of the network device hub, router, or access point. Check whether or not the DHCP function for the access point is enabled. If it is disabled, change it to enabled. If you have set the IP address manually, the IP address is outside the supported range invalid.

Enter the correct IP address. Confirm the connection and network setup of the PC or other device.

Epson L355

Connection using the EpsonNet Setup is available. Check the following: Check that the power is on for devices, such as the PC, that want to use the printer. Check that devices that want to use the printer, such as the PC, are on the same network. If you have checked the above points, perform network setup using EpsonNet Setup. Confirm IP address, subnet mask, and default gateway setup.

Check the following: Other devices on the network are turned on The network address set manually for the printer is correct The network address for the printer is the same as the one for other devices If the network address is incorrect, set the correct address using the printer's LCD panel. If you cannot change the settings using your printer, make settings using EpsonNet Setup.

Setup is incomplete. Confirm default gateway setup. A printer has given us freedom from this monotonous work. If you search brands in the market, then many options will come in your notice but one who has never failed in presenting a wide variety along with affordability at the same time is Epson.

With the help of innovation now they have come up with printers which can be used from anywhere in the house as they work on WiFi such as Epson L It is a wireless all-in-one printer with an integrated ink system.

Epson L | L Series | Epson Singapore

You can use it at home as well as at the office. However, due to lack of knowledge sometimes user face difficulties in connecting their printer to WiFi network but instead of consulting Epson printer support , you can do this on your own. In a city like The New York City , it is challenging to find out time as people have busy schedules, but the process which I will suggest is easy to apply and will not take much time for setup. There are three ways through which you can set up your printer.

  1. comment faire enregistrer sous avec mac.
  2. Epson Brasil | Página inicial.
  3. clean up your mac app.
  4. How to Install Epson L355 printer or scanner driver.
  5. james bond goldeneye n64 download mac!

If you are already using WPS, then there is no need to use it as it can result in the wireless network failure.